WLED Instructions

Connecting to the device’s WIFI Network

Most of our items that have LEDs use Open Source WLED software. The below instructions are how to get connected and adjust the most common settings. 

1. Power on the device and wait ~30 seconds
   
   
2. From a PC or smartphone, connect to the device’s WIFI network (network and password are above)
   
   
3. Once you are connected to the WIFI network, open a browser and go to http://4.3.2.1
   
   
4. Click “TO THE CONTROLS!” to visit the WLED settings page where you can adjust the color, speed, preset, patterns, etc. 

Optional - Changing the default preset

1. Determine the preset ID Number that you want to run all the time. Example shows preset id "3":
   
   
   
2. Open the Config menu and click on LED Preferences
   
   
3. Scroll down until you find the “Apply Preset ___  at boot” option and enter the ID number of the preset you want to run at start up
   
   
4. Click SAVE at the top or bottom of the page
   
   
5. Test the new preset setting by cycling power to the warp core